Disclaimer - Eliwell V800 Series Manual

FOLD PAR. DESCRIPTION
EE0/EE1 rEL Device version. Read-only parameter.
EE0/EE1 PEr Valve opening %. Read-only parameter.
EE0/EE1 PSH Overheating probe value. Read-only parameter.
EE0/EE1 PSA Saturation probe value. Read-only parameter.
EE0/EE1 SHt Overheating temperature. Read-only parameter.
EE0/EE1 Adr Enable valve driver. Indicates the address of the controlled valve. 0 = disabled.
FOLD = FOLDER (e.g. DEF folder includes the DEFrost parameters); PAR. = PARAMETER;
DEF. = DEFAULT; VAL= VALUE: to be entered manually, if necessary with the user's personalised settings (if different from the default settings).
* value <>0 for Application with 2 V800 drivers - 1 ID985/V controller (see relevant paragraph)

DISCLAIMER

This document is the exclusive property of Eliwell Controls S.r.L. and cannot be reproduced and circulated unless
expressly authorized by Eliwell Controls S.r.L.. Although Eliwell Controls S.r.L. has taken all possible measures to
guarantee the accuracy of this document, it declines any responsibility for any damage arising out of its use.
The same applies to any person or company involved in preparing and writing this manual. Eliwell Controls S.r.L.
reserves the right to make any changes or improvements without prior notice and at any time.
33 - EN
RANGE DEF. U.o.M.
/ / number
1 (EE0)
0...6 number
0 (EE1)*
VAL
V800