Conditions Of Use - Permitted Use; Prohibited Use; Liability And Residual Risks - Eliwell V800 Series Manual

CONDITIONS OF USE - PERMITTED USE

For safety reasons, the device must be installed and used according to the instructions provided. In particular,
parts carrying dangerous voltages must not be accessible in normal conditions.
The device must be adequately protected from water and dust with regard to the application, and must only be
accessible using tools (with the exception of the front panel).
The device is suitable for use in household refrigeration appliances and/or similar equipment and has been tested
for safety aspects in accordance with the harmonised European reference standards. It is rated:
• according to its construction, as an independently mounted automatic electronic control device;
• in terms of automatic operating characteristics, as a type 1B controller;
• in terms of software class and structure, as a Class A controller.
PROHIBITED USE Any use other than that expressly permitted is prohibited.
Note that the relay contacts provided are of a functional type and subject to failure: any protection devices
required by product standards, or suggested by common sense for obvious safety requirements, must be installed
externally to the instrument.

LIABILITY AND RESIDUAL RISKS

ELIWELL CONTROLS SRL declines any liability for damage due to:
• installation/uses other than those expressly specified and, in particular, failure to comply with the safety require-
ments of established standards and/or instructions specified in this document;
• use on panels that do not provide adequate protection against electric shocks, water or dust when assembled;
• use on panels allowing access to dangerous parts without having to use tools;
• tampering with and/or modification of the product;
• installation/use on panels which are not compliant with current standards and regulations.
13 - EN V800