Lifting Pole; Fitting The Mattress Support Extension - Invacare Medley Ergo User Manual

4.3 Lifting pole

Position the lifting pole in such a way that the handle extends inwards across the bed. Always lock lifting pole with
thumb screw. If the lifting pole is used while the handle has been turned away from the bed - the bed can tip when the
handle is used. Maximum load of the lifting pole is 80 kg. Make sure that the lifting pole screw is properly tightened.
Mounting
1. Insert the lifting pole into the lifting pole tube and fix with the thumb screw.
Adjusting the height of the lifting pole handle
1. Loosen the cord as shown in A.
2. The lifting handle can now be adjusted to the desired height.
3. Press the cord together as shown in B and check that the cord is locked in
the cord lock by pulling the handle.
The distance between the lifting pole and the mattress
Minimum (at 16 cm mattress)
Maximum (at 10 cm mattress)

4.4 Fitting the mattress support extension

1. Remove the foot bed end from bed.
2. Insert bed extension into frame of bed and secure with nut and bolt.
3. Reinstall foot bed end onto bed.
4. Add mattress deck extender to foot end of mattress deck.
36-59 cm
42-65 cm
18
A B