Table of Contents
Advertisement
120 |
distributes the heat evenly throughout the oven chamber.
By turning the selector switch (24( on desidered position,
resistance is switched on warning light (26( comes on and
goes off when the selected temperature is reached and
the resistance switch off. To turn off the oven, turn the
thermostat to the off position
The first position of the knob corresponds to the fan
operation for cooling – defrosting.
TURNING THE APPLIANCE OFF
Turning the appliance off in an emergency
MOD.
N°:
In case of malfunctioning, disconnect the gas and electric
Qn
V
kW:
Hz: 50/60
IPX2
power supplies from the appliances.
What to do in the case of malfunctioning or if the
appliance is not to be used for a long period
When the appliance is not to be used for a long time,
clean thoroughly and turn off both the gas and electric
supply. In the case of malfunctioning or failure, turn off
the gas supply and disconnect from the mains. Call the
EN
service centre.
CARE OF THE MACHINE
ATTENTION!
- Before cleaning, turn the machine off and let it cool.
- For electrically powered machines, turn off the
disconnecting switch to cut off the supply of
electricity.
Careful daily cleaning of the machine ensures perfect
operation and long life.
The steel surfaces are to be cleaned with liquid
dishwashing detergent diluted in very hot water, using a
soft cloth. For tougher dirt, use ethyl alcohol, acetone or
another non-halogen solvent.
WARRANTY CERTIFICATE
COMPANY NAME:
ADDRESS:
_________________________________________________________________________________________________________
POSTAL CODE :
___________
PROVINCE:
________________
ATTENTION!
The manufacturer declines all responsibility for any inaccuracies in this handbook due to typing or printing errors.
The manufacturer reserves the right to make any changes that may be required without altering the basic features of the
product. The manufacturer declines all responsibility in the event that the instructions given in this handbook are not fully
observed. The manufacturer declines all responsibility for any direct or indirect damaged caused by incorrect installation,
tampering, poor maintenance and negligent use.
.
_________________________________________________________________________________________________
TOWN:
_______________________________________________________________________________
INSTALLATION DATE:
MODEL.
_____________________________________________
PART NUMBER:
____________________________________
MOD.
N°:
Do not use abrasive powder detergents or corrosive
Qn
substances such as hydrochloric, muriatic, or sulphuric
V
kW:
Hz: 50/60
acid. The use of acid may compromise operation and
safety of the machine.
Do not use brushes or pads made of metal or alloys which
may cause rust stains. For the same reason, avoid contact
with iron objects.
Use caution with stainless steel pads and brushes which,
although they do not contaminate the surfaces, may
cause harmful scratches.
If the dirt is stubborn, absolutely do not use sandpaper
or grinding paper. We suggest using synthetic sponges
instead, such as Scotch-Brite(.
Also, do not use products for cleaning silver. Beware of the
fumes of hydrochloric sulphuric acid used, for example, to
clean floors. Do not aim jets of water at the machine, to
avoid damaging it.
After cleaning, rinse thoroughly with clean water and dry
carefully with a cloth.
________________________________________________________________
IPX2
Advertisement
Table of Contents
