Dear Customer; General Notes - Scheppach OSM100 Translation From The Original Instruction Manual

Manufacturer:
scheppach Fabrikation von
Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen

Dear customer,

we wish you a pleasant and successful working experience
with your new scheppach machine.
Note:
According to the applicable product liability law the man-
ufacturer of this device is not liable for damages which
arise on or in connection with this device in case of:
• improper handling,
• non-compliance with the instructions for use,
• repairs by third party, non authorized skilled workers,
• installation and replacement of non-original spare
parts,
• improper use,
• failures of the electrical system due to the non-
compliance with the electrical specifications and the
VDE 0100, DIN 57113 / VDE 0113 regulations.
Recommendations:
Read the entire text of the operating instructions prior to the
assembly and operation of the device.
These operating instructions are intended to make it eas-
ier for you to get familiar with your device and utilize its
intended possibilities of use.
The operating instructions contain important notes on how
to work safely, properly and economically with your ma-
chine and how to avoid dangers, save repair costs, reduce
downtime, and increase the reliability and working life of
the machine.
In addition to the safety regulations contained herein, you
must in any case comply with the applicable regulations of
your country with respect to the operation of the machine.
Put the operating instructions in a clear plastic folder to
protect them from dirt and humidity, and store them near
the machine. The instructions must be read and carefully
observed by each operator prior to starting the work. Only
persons who have been trained in the use of the machine
and have been informed on the related dangers and risks
are allowed to use the machine. The required minimum
age must be met.
In addition to the safety notes contained in the present
operating instructions and the special regulations of your
country, the generally recognized technical rules for the
operation of wood working machines must be observed.

General Notes

• When you unpack the device, check all parts for pos-
sible transport damages. In case of complaints the
supplier is to be informed immediately. Complaints
received at a later date will not be acknow ledged.
• Check the delivery for completeness.
• Read the operating instructions to make yourself famil-
iar with the device prior to using it.
• Only use original scheppach parts for accessories as
well as for wearing and spare parts. Spare parts are
available from your specialized dealer.
• Specify our part numbers as well as the type and year
of construction of the device in your orders.
10 english
osm 100
Delivery Status
oscillating spindle grinding machine
workbench of massive grey cast iron
6 abrasive sleeves (K80, ø
15/21/28/40/53/77 mm)
5 rubberized grinding rolls (115 mm)
6 table inlays ø 18/25/31/44/57/82
4 spindle discs ø 14/22/46/71
Technical Data
Dimensions
L x W x H mm
RPM 1/min
Table size mm
Table height mm
oscillation stroke
mm
grinding height
max. mm
ø spindle mm
vacuum connector
ø mm
Gewicht kg
Drive
Motor V/Hz
Input P1 W
Subject to technical changes!
Noise parameters acc. to EN ISO 3744
The indicated rates are emission rates and do not corre-
spond with safe working rates. Although there is a cor-
relation between emission and immission levels, it is not
sure whether reliable precautions are necessary or not.
The following factors can influence the present immis-
sion level at the working place: Time of impact, property of
working room, other noise sources (for instance, number
of machines and other neighbouring activities. The reli-
able working place rates can also vary from one country
to another. Yet this information should enable the user to
perform a better evaluation of the dangers and risks,
Acoustic power level in dB
Idling LWA = 84 dB(A)
Finishing LWA = 87 dB(A)
A measurement uncertainty allowance K = 3 dB applies to
the mentioned emission values.
Ausstattung Fig. 1
1 ON/OFF switch
2 housing
3 grey cast iron table
4 tool spindle
5 table inlets
6 rubber sleeves
7 abrasive sleeves
8 table inlay slot
9 rubber and abrasive sleeves slot
10 vacuum connector
12 lower spindle disc
13 upper spindle discs (3 pcs.)
a. small 16 mm
b. medium 20 mm
c. large 35 mm
mm
mounting tool
Operation Manual
400/365/440
2000
370 x 290
330
16
98
12,7
38
13,5
230–240/50
450