Compaq iPAQ MP3800 User Manual page 8

Getting Started
Identifying the Projector Buttons (Continued)
Item Symbol
2
3
4
5
To use standby mode, press the
a six to ten second delay, the unit enters Standby mode and the
projector lamp turns off. A "Going to Standby" message appears
on the screen for the duration of the six to ten second delay. When
the message disappears from the screen, there is a 45 second
delay before the lamp can be turned back on. Wait 45 seconds to
allow the lamp to cool before pressing the
again. To avoid going to Standby, press the
again within the first five seconds.
1–6
Control
Menu
button
Plus
button
Minus
button
Resync
button
Compaq iPAQ Microportable Projector MP3800 User's Guide
Function
1. Press this button once to start the
on-screen display menu.
2. Press it again to select an item on
the menu.
3. If pressed after selecting "yes" or
"no" to a question, the request will
be processed and the menu will go
one level higher.
4. If pressed after changing an
adjustment scale, the new
information will be saved and the
menu will go one level higher.
Selects and adjusts the on-screen
scroll-up menu functions.
Selects and adjusts the on-screen
scroll-down menu functions.
Automatically synchronizes the
projector to track the input source.
Power/Standby
Power/Standby
Power/Standby
button and, after
button
button