Compaq iPAQ MP3800 User Manual page 13

Connecting the Projector to a Notebook
Computer
1. Connect one end of the projector signal cable into the back of
the projector and the other end to the DVI connector 1 A or
the VGA connector 1 B on the notebook computer and
tighten the screws.
✎
Be sure the signal cable aligns with the connector. Do not force
the cable onto the connector or you may damage the signal cable
or the projector.
2. Connect one end of the power cord 2 into the back of the
projector, and the other end to an electrical outlet that is
easily accessible and close to the projector.
Compaq iPAQ Microportable Projector MP3800 User's Guide
Using the Projector
2–3