Compaq iPAQ MP3800 User Manual page 53

After the lamp module has been replaced, reset the lamp hours in
the on-screen display menu to prevent the "Lamp May Fail Soon.
Replacement Suggested" message from appearing again. To reset
the lamp hours:
1. Be sure the projector is turned off.
2. Make sure all connections except the power cable are
disconnected.
3. Press and hold the
turning the projector on.
4. Connect the VGA cable to the projector. "Service" will now
be displayed as an option in the Main menu.
5. Select Service and press the
projector.
6. Select Reset Lamp Hours from the Service menu and press
the
7. Select Yes from the Confirm Reset menu and press the
Menu
8. Select Save and Return.
Compaq iPAQ Microportable Projector MP3800 User's Guide
button.
Menu
button.
button on top of the projector while
Menu
Menu
Care and Maintenance
button on the top of the
7–5