Table of Contents
Advertisement
Troubleshooting (Continued)
Problem
Remote control does not operate.
Compatibility issues with
equipment attached to the
projector.
Image size is too small or too
large.
Compaq iPAQ Microportable Projector MP3800 User's Guide
Solutions
1. Ensure the remote control is pointed
at the sensor and is within 21.0 feet
(6.4 meters) of the projector.
2. The battery may need to be
replaced.
3. Verify that the battery is installed
properly.
Contact your Compaq authorized service
provider or call Compaq Customer
Support for help. Refer to the Worldwide
Telephone Numbers booklet included in
the projector documentation kit for a
complete list of customer support
numbers to call.
1. Adjust the digital zoom or move
the camera until the image is the
desired size.
2. The projector may be set to display
in the center of the display area
without any expansion. To change
the setting, access the on-screen
display menu, select A/V & HDTV
Control, select HDTV/Video, then
select how the image should be
shown in the display area. Refer to
Chapter 3, "Using the On-Screen
Display Menu" for more information.
Troubleshooting
8–7
- Quick Links:
- Getting Started
Hide quick links:
Advertisement
Table of Contents
