Compaq iPAQ MP3800 User Manual page 39

Using the Remote Control
There are two remote control receiver sensors on the projector.
They are located on the Compaq logo plates on either side of the
projector. When using the remote control, be sure these sensors
are not blocked. The remote control will work up to 21.0 feet
(6.4 meters) from the projector when pointed at one of the
sensors.
The Page Up and Page Down functions of the remote control will
not work unless a desktop or notebook computer is connected to
the projector with the USB cable. These functions are not
available when a Compaq iPAQ Pocket PC is connected to the
projector.
To use the Page Up and Page Down functions on the remote
control, the USB cable (included with the projector) must be
used. Connect one end of the USB cable to the USB connector on
the projector and the other end to the USB connector on the
computer.
✎
Microsoft Windows XP, Windows ME, Windows 2000, and
Windows 98 support USB connections. Microsoft Windows NT
and early versions of Windows 95 do not support USB
connections.
5–4 Compaq iPAQ Microportable Projector MP3800 User's Guide