Table of Contents
Advertisement
Set up your smartphone
Insert the SIM card and set up your smartphone
Your SIM (Subscriber Identity Module) card contains information on your
wireless account. To make calls or use your smartphone's email or web
features, you need to insert a SIM card.
If you don't have a SIM card, contact AT&T.
To take advantage of the high-speed data connection available on your
smartphone, you may need to have a 4G or 3G SIM card. Check with AT&T
for information.
1
Use your fingernail to open the
18
Chapter 2 : Basics
SIM card slot
cover.
2
Insert the
SIM
card. Note the position of the notch.
* Notch
3
Close the
SIM card slot
cover.
4
Press and hold the
power
button
your smartphone until you see a logo on the screen (approximately five
seconds). Your smartphone needs a few seconds to start up.
TIP
If your smartphone does not turn on after you press and hold power, you
need to connect your smartphone to the AC charger to charge it.
5
Follow the onscreen instructions to complete setup.
6
To create a Palm profile, enter a working email address, create a
password for your profile, and select and answer a security question.
IMPORTANT
Be sure to write down the email address and password that you
use to create your profile; you will need them later.
on the upper-right corner of
Advertisement
Table of Contents
