Advertisement
HINT: Telling the difference between log #5 & log
#6. Look at the top of both logs. The top of log #5
has a hole for a log locating pin and the top of log
#6 does not.
21. Install one of the #5 logs
as shown to the right.
There is a hole in the
bottom of the log that
rests on log locating pin
#9 (see step 18). The
chared end of the log
points at log pin #8
22. Install the other log #5
as shown to the right.
There is a hole in the
bottom of the log that
rests on log locating pin
#6 (see step 18). The
chared end of the log
points at log pin #7
NOTE: The arrows indicate the angle
of the charred end of the logs
from the top.
Page 12 of 24
DaVinci 72" SS Timber Fire Log Set
Installation Instructions
Front View
Front View
Charred
End
17602248 — 7/25/22
Top View
Bottom View
Top View
Bottom View
Charred
End
© Travis Industries, Inc.
Advertisement
