Advertisement
35. Place more ember chunks on the ember glass installed in the last step.
NOTE: Make sure that no glass or ember chunks are obstructing the slot where the inner glass will
rest. If anything has fallen into the slot, remove it with a vacuum, small screwdriver, or compressed air.
36. Reinstall the outer glass using the glass lifting suction cup set. Take care not to damage the edges of the glass
when placing it back on the fireplace. Place the outer fireback filler pieces in place. They are held in place by
magnets. Place the bottom edge of the filler piece in the lower corner of the opening and then tilt the filler up until
the magnets secure it to the fireplace.
Page 21 of 24
DaVinci 72" SS Timber Fire Log Set
Installation Instructions
17602248 — 7/25/22
© Travis Industries, Inc.
Advertisement
