Basic Operations; Turning The Power On/Off; Opening The Operation Panel And Adjusting The Angle - Mitsubishi MMES User Manual

Table of Contents

Advertisement

11. BASIC
OPERATIONS
Note:
• Be sure to read this chapter while referring to
"Controls" (page 91).

Turning the Power On/Off

Note:
• Start the engine before using this unit.
• Be careful about using this unit for a long time
without running the engine. If you drain the
vehicle's battery too far, you may not be able to
start the engine and this can reduce the service
life of the battery.
q Turning the power on
1. Start the engine. The power is
automatically turned on and the startup
screen is displayed.
Note:
• The power is turned on even when the ignition
switch is set to the ACC ON position.
2. The startup screen automatically changes
to the caution screen. Touch the [OK] key.
The system resumes from its status when
the power was turned off.
The navigation system does not operate until
the [OK] key is touched.
• Some audio features are available even if
the [OK] key is not touched.
q Turning the power off
1. Turn the ignition switch to the OFF position.
98
Opening the Operation
Panel and Adjusting the
Angle
The operation panel can be opened/closed to
insert/eject a disc or memory card. The angle
of the operation panel can be adjusted to suit
the mounting angle of the unit or light coming
into the vehicle.
WARNING
• To prevent the battery from going
dead, operate this unit with the engine
running if possible.
• When the operation panel is operating,
be careful not to get your hand or
finger caught between the panel and
main unit or the instrument panel of
the vehicle.
• Do not move the operation panel by
hand.
q Opening/closing the
operation panel
1. Press the [OPEN/TILT] button to display
the OPEN/TILT screen.
2. Touch the [Panel Open/Close] key.
The operation panel opens.
3. Touch the [Panel Open/Close] key when
the operation panel is open.
The operation panel closes.
q Adjusting the angle of the
operation panel
The angle of the operation panel can be
adjusted in the range of 0 to 30°.
1. Press the [OPEN/TILT] button to display
the OPEN/TILT screen.

Advertisement

Table of Contents
loading

Table of Contents