Table of Contents
Advertisement
Problem
The iPod cannot be operated.
Audio is not output from the iPod.
Bluetooth Audio
Problem
The Bluetooth device cannot connect with
the unit.
Playback is not possible.
Track names, artist names, and album names
are not displayed correctly.
Audio is no longer output from the connected
audio device.
If an error display other than the ones described above appears, turn off and on the ACC power to restart the system. If the problem persists, consult
your Mitsubishi Motors dealer.
Disconnect the USB connection, start playback from the iPod, and then reconnect the iPod.
Disconnect the USB connection, reset the iPod, and then reconnect the iPod.
From your iPod, change the audio output setting from Bluetooth ("Car-Navi") to the dock connector.
Disconnect the iPod and then reconnect it.
Correctly connect a Bluetooth-compatible mobile phone.
É "Pairing a Bluetooth audio player" (page 120)
Turn on the power of the audio device.
Connection may not be possible and sound may skip depending on the location of the Bluetooth audio
device. Place the Bluetooth audio device in an area with good signal transmission.
Use an audio device compatible with AVRCP.
Disconnect the audio device, and then reconnect it.
Start the player of the connected audio device.
Use an audio device compatible with AVRCP 1.3.
Perform playback by initiating playback from the player of the connected audio device.
Select the Bluetooth audio device again from the Bluetooth setting screen.
Measure
Measure
135
Advertisement
Table of Contents
