Table of Contents
Advertisement
For some of the alert points, the enforced or
expected speed limit is available. For these
points, the audio alert can be different if you
are below or above the given speed limit.
•
Only when speeding: The audio alert is
only played when you exceed the given
speed limit.
•
When approaching: The audio alert is
always played when approaching one of
these alert points. In order to draw your
attention, the alert is different when you
exceed the speed limit.
q Speed limit warning
Maps may contain information about the
speed limits of the road segments. MMES is
able to warn you if you exceed the current
limit. This information may not be available for
your region, or may not be fully correct for all
roads in the map.
Speed warning can be fine-tuned in Sound
and Warning settings (page 66).
You can set the relative speed above which
the application initiates the warning.
The following alert types are available:
•
Audio warning: you receive a verbal
warning when you exceed the speed limit
with the given percentage.
•
Visual warning: the current speed limit is
shown on the map when you exceed it
(for example:
).
You can also choose to see the speed limit
sign on the map all the time.
62
Note:
• The speed limit warning is an auxiliary function.
Check the speed in the vehicle's speedometer
and observe the legal speed.
q Arrival notification
The inquiry screen appears when you stop
near the final destination.
MMES stops the route guidance and displays
the route summary if you select "Yes".
MMES continues the route guidance if you
select "No".
Advertisement
Table of Contents
