Mitsubishi MMES User Manual page 50

4. You can enter the latitude and longitude
values in any of the following formats:
decimal degrees; degrees and decimal
minutes; or degrees, minutes and decimal
seconds.
5. (optional) If necessary, tap
then
and enter the coordinate in UTM format.
6. When finished, tap
50
7. A full screen map appears with the
selected point in the middle. If necessary,
tap the map somewhere else to modify the
destination. The Cursor (
the new location. Tap
to confirm the destination, or tap
destination.
8. After a short summary of the route
parameters, the map appears showing
the entire route. The route is automatically
calculated. Tap
to modify route parameters, or tap
.
q Building a route from the
) appears at
You can also build your route destination by
destination from the My Route menu.
1. If you are on the Map screen, tap
to select a different
2. In the Navigation menu, tap
3. Tap
and start your journey.
4. There is only one line in the list of route
5. Tap
list of destinations (Create
Route)
to return to the
Navigation menu.
.
.
points, the start point of the route,
normally the current position.
to select the destination.