Mitsubishi MMES User Manual page 24

q Manipulating the map
Tap the map anywhere to browse it during navigation. The map stops following the current position (the Vehimarker, a red arrow, is not locked in a fix
position on the screen any more) and control buttons appear to help you modify the map view.
Action
Moving the map with No buttons
drag&drop
Zooming in and out
Tilting up and down
Rotating left and right
2D or 3D view
Compass in 2D map view
mode
24
Button(s)
You can move the map in any direction: tap and hold the map, and move your finger towards the
direction you want to move the map.
Changes how much of the map is displayed on the screen.
, MMES uses high-quality vector maps that let you examine the map at various zoom levels,
always with optimized content. It always displays street names and other text with the same font
size, never upside-down, and you only see the streets and objects that you need.
Map scaling has a limit in 3D map view mode. If you zoom out further, the map switches to 2D
view mode.
Tap the button once to modify the view in large steps, or tap and hold the button to modify it
continuously and smoothly.
Changes the vertical view angle of the map in 3D mode.
, Tap the button once to modify the view in large steps, or tap and hold the button to modify it
continuously and smoothly.
Changes the horizontal view angle of the map.
, Tap the button once to modify the view in large steps, or tap and hold the button to modify it
continuously and smoothly.
Tap this button to switch between the 3D perspective and 2D top-down map view modes.
,
The direction of the compass shows North. Tap the button to switch to North-up view, and then
tap again to rotate the map in the previous direction.
,
Description