Source Operations; Radio Operations - Mitsubishi MMES User Manual

C: This position is approximately 1 m from the
rear of the vehicle.
D: This position is approximately 50 cm from
the rear of the vehicle.
E: This position is approximately aligned with
the position directly below the vehicle's rear
bumper.
F: These positions are approximately 20 cm
from the sides of the vehicle.
q Adjusting the video of the
Rear View Camera
Note:
• Adjustments can only be made when the gear
lever is set to the reverse position.
1. Touch the screen while video from the
Rear View Camera is being displayed.
2. Touch the [Display Adj.] key.
Display settings are the same as those for
a DVD/CD.
3. Touch the key for the item you want to
adjust.
• To adjust the brightness, touch the
[Brightness] key.
• To adjust the lightness, touch the [Tint]
key.
• To adjust the color, touch the [Color] key.
• To adjust the black level, touch the
[Black Level] key.
4. To increase the setting, touch the [+] key.
To decrease the setting, touch the [–] key.
12. SOURCE
OPERATIONS

Radio Operations

This unit supports FM and AM radio reception.
This unit also has a built-in "Radio Broadcast
Data System" (RBDS) decoder system that
supports broadcast stations transmitting
Radio Broadcast Data System data.
Radio Broadcast Data System functions are
only available for the FM band.
Note:
• When you store a station without broadcasting
Radio Broadcast Data System data to the
preset memory, store the station after receiving
it for more than 10 seconds. If you store such a
station within 10 seconds, it will be stored as an
Radio Broadcast Data System station, and the
Radio Broadcast Data System tracking function
will activate when you tune in.
q Selecting Tuner mode
1. Press the [AV] button to display the Source
screen.
2. Touch the [FM/AM] key to select Tuner
mode.
The Tuner mode screen is displayed.
• You can also select Tuner mode by
using the Steering Wheel Audio Remote
Control (if so equipped).
É "Steering Wheel Audio Remote
Control Operations" (page 103)
1 2
3
4
1 Information pane
2 Preset keys
3 Current frequency
4 Operation keys
• When station names and PTY (Program
Type) of the currently tuned station are
received, they are displayed on the
information pane.
• "Stereo" appears when a stereo broadcast
is detected.
• "Scan" appears when scanning stations.
q Radio operations
Listening to the radio
1. Touch the [FM/AM] key to select the radio
band.
Each time you touch this key, the radio
reception band changes in the following order:
• FM1 É FM2 É AM É FM1...
• The current radio reception band is
indicated at the top of the display.
2. Touch the desired Preset key on the Preset
key pane to tune in the preset station.
105