Steering Wheel Audio Remote Control Operations - Mitsubishi MMES User Manual

• It may take a long time to recognise the
connected device.
Note:
• If USB memory mode is already selected, the
system switches to the relevant source media
mode, and playback starts.
• Never insert unrelated objects into the USB
connector.
• Always insert the USB memory fully into the
connector. Incomplete connections may cause
the device not to be recognised.
Disconnecting a USB memory
CAUTION
• For your safety, the driver should not
connect or disconnect a USB memory.
• Do not turn off your vehicle or disconnect
a USB memory while accessing a file from
the USB memory. Before disconnecting
the USB memory, change to a source
mode other than USB memory mode,
press the [POWER] button, or press the
[AV] button and touch the [Audio OFF] key.
1. Confirm that data is not being transferred
to or from the USB memory.
For how to confirm this, refer to the
operation manual of your USB memory.
2. Remove the USB memory from the USB
connector.
Note:
• When turning on the ACC power with no USB
memory connected, "No USB memory." may
be displayed on the screen if USB memory
mode is selected.
q Connecting/Disconnecting
an iPod
An iPod can be used for playing audio data
with this system.
É "iPod Operations" (page 117)
To connect your iPod to this unit, use a USB
cable (if so equipped).
For details, consult your Mitsubishi Motors
dealer.
Connecting an iPod
CAUTION
• For your safety, the driver should not
connect or disconnect an iPod.
• Do not turn off your vehicle or disconnect
an iPod while accessing a file from the iPod.
1. Turn on the power of your iPod.
2. Confirm the orientation of the connectors,
and connect the iPod to the USB cable.
• It may take a long time to recognise the
iPod.
Note:
• If iPod mode is already selected, the system
switches to the relevant source media mode,
and playback starts.
• Never insert unrelated objects into the iPod
USB connector.
• Always insert the cable connector fully into the
iPod. Incomplete connections may cause the
iPod not to be recognised.
Disconnecting an iPod
CAUTION
• For your safety, the driver should not
connect or disconnect an iPod.
• Do not turn off your vehicle or
disconnect an iPod while accessing a
file from the iPod. Before disconnecting
the iPod, change to a source mode other
than iPod mode, press the [POWER]
button, or press the [AV] button and
touch the [Audio OFF] key.
1. Confirm that data is not being transferred
to or from the iPod.
For how to confirm this, refer to the
operation manual of your iPod.
2. Remove the iPod from the iPod USB
connector.
Note:
• When turning on the ACC power with no
iPod connected, "No USB memory." may
be displayed on the screen if iPod mode is
selected.
Steering Wheel Audio
Remote Control Operations
You can use the Steering Wheel Audio
Remote Control (if so equipped) to perform
various audio operations.
These operations can be used only when your
vehicle is equipped with a Steering Wheel
Audio Remote Control.
Note:
• While driving, be sure that audio control
operations do not interfere with your driving.
103