Mitsubishi MMES User Manual page 35

6. A full screen map appears with the
selected point in the middle. If necessary,
tap the map somewhere else to modify the
destination. The Cursor (
the new location. Tap
to confirm the destination, or tap
to select a different
destination.
7. After a short summary of the route
parameters, the map appears showing
the entire route. The route is automatically
calculated. Tap
to modify route parameters, or tap
and start your journey.
Selecting an intersection as the
destination
To enter an address as the destination, do as
follows:
) appears at
1. If you are on the Map screen, tap
Navigation menu.
2. In the Navigation menu, tap the following
buttons:
3. Select the country, state and city/town as
described earlier (page 30).
4. Enter the street name:
a. Tap
b. Start entering the street name on the
keyboard.
c. Find the street you need:
• The most likely street name is
always shown in the input field. To
accept it, tap
• If the desired name does not
show up, the names that match
the string appear in a list after
entering a couple of characters
(to open the list of results before
it appears automatically, tap
street from the list.
to return to the
, .
5. Enter the intersecting street name:
.
.
). Select the
1. Tap .
• If only a few intersecting streets
exist, their list appears immediately.
• In case of a longer street, the
keyboard screen appears.
Start entering the name of the
intersecting street on the keyboard.
As soon as the street names that
match the entered string can be
shown on one screen, their list
appears automatically. Select from
the list.
35