Mitsubishi MMES User Manual page 37

5. Instead of entering the street name, tap
. This way the center
of the displayed city/town becomes the
destination of the route.
6. A full screen map appears with the
selected point in the middle. If necessary,
tap the map somewhere else to modify
the destination. The Cursor (
appears at the new location.
Tap to confirm the
destination, or tap
select a different destination.
7. After a short summary of the route
parameters, the map appears showing
the entire route. The route is automatically
calculated. Tap
to modify route parameters, or tap
and start your journey.
Entering an address with a ZIP
)
code
All of the above address searching
possibilities can be performed with entering
the ZIP code instead of the city/town name.
Find below an example with a full address:
to
1. If you are on the Map screen, tap
Navigation menu.
2. In the Navigation menu, tap the following
buttons:
3. Select the country and state as described
earlier (page 30).
4. Enter a new city/town using its ZIP code:
a. Tap
to return to the
5. Enter the street name:
, .
.
b. Tap to open the numeric keypad.
c. Start entering the ZIP code.
d. Find the city/town you need:
• The most likely ZIP code is always
shown in the input field. To accept it,
tap .
• If the desired number does not
show up, open the list of results by
tapping
the ZIP code from the list.
a. Tap .
b. Start entering the street name on the
keyboard.
. Select
37