Hide thumbs Also See for XP2070:
Table of Contents

Advertisement

/
(P) once. The steam symbol appears
and the start/stop control light blinks.
Once this indicator stops blinking, your
appliance is ready to froth milk.
First, use a spare container and place it under
the accessory without touching the bottom.
Press the steam button
A small squirt of hot water will be released
which you may prefer to dispose of before
proceeding to froth your milk.
To stop, press the steam button
Next put your container under the accessory
so that the end of the accessory is plunged
into the milk, without touching the bottom
(17).
• Press the steam button
symbol blinks.
• Once the desired quantity of milk froth has
been produced, press the steam button
again to stop
(P). The cool down cycle
starts.
Follow the cleaning operation below in order
to prevent the milk from drying on the
cappuccino accessory:
• Place a cup under the auto cappuccino
accessory (F).
Repeat the procedure for preparing frothy
milk, but this time with water, for
approximately 1 minute.
• Press the steam /hot water button
(P) again to stop the production of steam.
• Clean the cappuccino accessory with a damp
cloth.
• For more thorough cleaning of the auto
cappuccino accessory, please refer to the
section below entitled "Cleaning the
machine".

4 . HOT WATER

You can prepare hot water with this machine.
• Fill the water container (1) (2) (3) and turn
on the machine (4).
• Place the cup beneath the cappuccino
accessory (F).
As soon as hot water button commences to
glow continuously, the machine is ready to
operate.
• Press the water / steam selection button
/
(15). It is normal for the steam symbol
26
XP2070 anglais.P65
and the blinking ON/OFF control light to
appear when the button is first pressed.
• When the desired quantity of water has run
through, stop the machine by pressing again
the hot water button
You can also programme the quantity of
(P)
water:
• When your appliance is ready, press the
water / steam selection button
twice.
(P).
• Then press the scroll button (S1) to activate
the quantity memory function. The symbol
" " is displayed in the centre of the screen.
When you reach the desired quantity of
water, stop the appliance by pressing the hot
water / steam button
(P). The steam
Recipes
Savour your espresso just as you like it: when
you want to relax or to round off a good
meal.
Here are a few recipes which you will be able
to create with your espresso maker.
. Original espresso
• Take one measuring spoonful of good
quality well roasted espresso coffee, and run
it directly into the pre-heated cup.
If you use good, finely ground coffee, the cup
/
will be crowned by a fine head of froth.
• Add sugar if desired and treat yourself.
Original espresso is drunk without milk but
plenty of sugar.
. Cappuccino
For a state of the art cappuccino, the ideal
quantities are as follows: 1/3 coffee, 1/3 hot
milk, 1/3 milk froth. The quantity of hot milk
+ froth obtained should be about double the
amount of coffee prepared.
• Use large cups which have been pre-heated.
• Fill them with coffee to the equivalent of
one cup of espresso and top up with milk
which has been frothed up using the
cappuccino accessory.
• Lastly, sprinkle with drinking chocolate
powder.
. Café crème
• Prepare a classic espresso in a large cup.
26
(P).
/
(P)
/
(P) or (S2).
7/11/05, 12:32

Advertisement

Table of Contents
loading

Table of Contents