8.3
8.3
Installing the air suction
branch
© Copyright 2016 ABB. All rights reserved.
Disassembly and assembly
Removing and fitting filter silencer or air
suction branch
Removing and fitting filter silencer or air suc-
tion branch
Disconnect all air lines / ducts in accordance with engine builder's in-
structions.
Remove the insulation where necessary.
Loop the lifting gear around the air suction branch.
Unscrew the nuts (74027) and remove them together with their wash-
ers (74018).
Remove the air suction branch and set it down to one side.
Install the air suction branch in reverse order.
Operation Manual / TPL76-C
8
8.3
Page 93