Table of Contents
Advertisement
NOTICE
© Copyright 2016 ABB. All rights reserved.
Disassembly and assembly
Dismantling and fitting nozzle ring at
turbine end
Tightening flange connection
Fit screws (61044).
Tighten screws (61044) in accordance with following procedure and in
following order:
Flange connection
Tighten screws crosswise
Screw tightening sequence
The screw positioning numbers must be marked on the component.
This enables simple and efficient tightening.
Operation Manual / TPL76-C
8
8.8
Page 123
Advertisement
Table of Contents
