Table of Contents
Advertisement
WARNING
© Copyright 2016 ABB. All rights reserved.
Disassembly and assembly
Removing cartridge group
Transporting / turning internal part of compressor casing
Carefully turn internal part of compressor casing complete with wall in-
sert and diffuser about support angle (90025) and put onto underlay.
Set down casing on flange (F).
Set down internal part of compressor casing in such a way that lifting
device (90190/90195) can be removed.
Ensure that the shim does not slip.
Rest the internal part of the compressor casing only on flange (F).
Check shim and adjust as necessary.
Operation Manual / TPL76-C
8
8.5
Page 98
Advertisement
Table of Contents
