Table of Contents
Advertisement
© Copyright 2016 ABB. All rights reserved.
Disassembly and assembly
Dismantling and installing the turbine
diffuser and nozzle ring
Replace two screws (61056) with guide studs (90320).
Fit assembly plate (90020) over studs (61036).
Screw nuts (61037) onto start of threads of studs (61036) to secure.
Remove remaining screws (61056).
Press away turbine diffuser (63000) using press-off screws (90901)
and withdraw it until assembly plate (90020) touches nuts (61037).
Loop lifting gear around turbine diffuser (63000) and secure to crane.
Remove nuts (61037) and assembly plate (90020) from studs.
Fully withdraw turbine diffuser and remove.
Remove guide studs (90320).
Operation Manual / TPL76-C
8
8.6
Page 104
Advertisement
Table of Contents
