Installing A Sim Card - ABB AquaMaster Explorer Instruction Manual

Electromagnetic Flowmeter
AquaMaster™ Explorer

2.4.3 Installing a SIM Card

Referring to Fig. 2.25:
1. Remove the transmitter from its mounting point.
2. Use water to wash off any loose dirt from the case.
3. On the back of the transmitter, unscrew and remove the cover
4. Carefully lift the right-hand edge of the holder
5. Slide the SIM card
6. Close the holder
Fig. 2.25 Installing a SIM Card – AquaMaster Explorer
12
C
into the carrier, contact side down and bevelled edge to the top-right.
B
until it clicks into place and refit the cover.
A
A
to the SIM card holder
B
outwards.
2 Mechanical Installation
B
.
B
C
IM/AM/E Issue 10