Intended Use; Technical Specification; How The Assa Abloy Sl300 Works - Assa Abloy SL300 User Manual

Intended use

The ASSA ABLOY SL300 is an automatic sliding door operator developed to facilitate entrances to
buildings and within buildings through sliding doors.
The door is designed to offer continuous use, a high degree of safety and maximum lifetime. The
system is self-adjusting to the effects caused by normal variations in the weather conditions and to
minor friction changes caused by e.g. dust and dirt.
It is to be used indoors where it is suitable for almost all types of external and internal sliding doors.
The product is not intended for usage in an Escape route.
Ensure that the lock is only activated when there are no persons in the room.
For installation and maintenance see Installation and Service manual 1021504.
Save these instructions for future reference.

Technical specification

Manufacturer:
Address:
Type:
Mains power supply:
Power consumption:
Degree of protection:
Sound pressure:
Approvals:

How the ASSA ABLOY SL300 works

The ASSA ABLOY SL300 works electromechanically. The drive unit, control unit, transmission, optional
battery unit and electromechanical locking device are all assembled in a support beam. The motor
and gear box transmit movement to the door leaves by means of a tooth belt. The door leaf is fitted
to a door adapter/carriage and hangs on a sliding track. The active leaf travel is directed by a floor
guide.
When an OPENING IMPULSE is received by the control unit the motor starts and transmits movement
to the door leaves, which move to the open position.
The closing starts when no OPENING IMPULSE is received and the HOLD OPEN TIME has expired.
The ASSA ABLOY SL300 user can select five different modes of operation if a programme selector is
installed. See Operation mode selectors on page
1020882-en-5.0
ASSA ABLOY Entrance Systems AB
Lodjursgatan 10, SE-261 44 Landskrona, Sweden
ASSA ABLOY SL300
100 V AC -10% to 240 V AC +10%, 50/60 Hz, fuse 10 AT (building installa-
tion)
Max. 200 W
IP20
Third party approvals from established certification organizations valid
for safety in use.
Issue 2022-03-16
10.
9