Displaying And Setting The Security Mode - HP Visualize c160 Owner's Manual

Displaying and Setting the Security Mode

The SECure flag is a variable stored in non-volatile memory. (Non-volatil-
memory retains its contents even after power is turned off.) If you reset this
flag to a new value, the change takes effect the next time you reboot the
workstation.
When the SECure flag is set to on, autoboot and autosearch are enabled
and cannot be stopped. The system boots from the default boot paths regard-
less of user intervention.
To display the current setting for the SECure flag, enter the following com-
mand:
secure
To set the SECure flag on or off, enter one of the following:
secure on
secure off
The Boot Console Interface
Displaying and Setting the Security Mode
201