Ultra, Wide Scsi Ids - HP Visualize c160 Owner's Manual

SCSI Connections
Assigning SCSI Device IDs
Fast, Wide Differential SCSI IDs (C160/C180/C200 Upgrades)
CAUTION: Do not use SCSI device ID 7 for any device.
Table 28 Fast, Wide Differential SCSI Device Drives and Device ID
Fast, Wide Differential SCSI Device Drives
1st Internal Device
2nd Internal Device
1st External Device
2nd External Device
3rd External Device
4th External Device
NOTICE: You can have no more than 15 SCSI devices connected to a fast, wide bus.

Ultra, Wide SCSI IDs

Before assigning a SCSI device ID to your drive, you need to check your
SCSI device IDs. To check which SCSI device IDs are available and assign
an ID to your device, follow these instructions which use Table 29.
170
Before assigning a SCSI device ID to your drive, you need to check your SCSI
device IDs. To check which SCSI device IDs are available and assign an ID to
your device, follow these instructions which use Table 28.
1 Write in the type of each device currently connected to your system under the
heading "Fast, Wide Differential SCSI Device Drives" and each drive's SCSI
device ID under the heading "Device ID."
2 Add your new drive to the table.
3 Check to see what SCSI device IDs are not used. You may use ID numbers 0
through 6 and 8 through 15 if they are not already in use. If the default ID on
your drive does not conflict with any existing drive IDs, use that ID. If your
default address conflicts with an existing drive ID, assign a new fast, wide
SCSI device ID to your drive. Refer to the drive's installation documentation
for information on changing the device ID.
______________________________
______________________________
_______________________________
_______________________________
_______________________________
_______________________________
Device ID (Address) Number
(ID 7 not available)
__________
__________
__________
__________
__________
__________