Anchor Points - Bornack FS70 User Manual

LOAD DIRECTIONS
D Only use the safety hook in a manner that
ensures that it can be aligned optimally in
the direction of the load.
E Do not exert shearing loads onto the safety
hook.
F Do not exert loads onto the safety hook via
the locking plate/snapper.
G Do not use the safety hook to connect more
than two components with one another.
CAUTION: RISK TO LIFE!
Connecting the safety hook with wide straps
can reduce the strength of the safety hook and/
or the straps.

ANCHOR POINTS

CAUTION: RISK TO LIFE!
Anchor points must be adequately strong
(observe 12 kN according to EN 795 and/or
DGUV Regulation 112-198)!
ATTENTION:
Only use anchor points at which the safety
hook can be aligned optimally in the direction
of the load (see section LOAD DIRECTIONS).
CAUTION: RISK TO LIFE!
When selecting the attachment point, mini-
mise the fall height and/or the free fall!
FS70 IN USE
D
E
F
6 | 7
D
G