Advertisement
• The load may only be hooked into the
support rope or the pulleys to which
the support rope is connected.
• The lock function of the LH200 cannot
be guaranteed, if it is used over edges.
Therefore do not use the LH200 over
edges. When using the LH200, ensure
that the support rope has not been
retracted too far because this may
cause the system to block and the load
can no longer be lowered.
• Any misuses not listed here can be
identified reliably by means of a sepa-
rate risk analysis by the user, and
appropriate safety measures can be
taken.
POSSIBLE MISUSES
EN
Advertisement
