Advertisement
LH200
Load holder
Subject to technical changes
INTENDED USE
The load holder LH200 may only be used
to manually lift, position or lower loads
from or to a higher or lower level. A suit-
able rope clamp can be used to facilitate
a better grip on the rope.
The load holder must be securely
attached to an adequately strong
anchor point. A hoist can be integrated
to move heavier loads.
Maximum useful load depending on the
ratio:
• 1:1 without a hoist 25 kg
• 2:1 hoist 50 kg
• 3:1 hoist 75 kg
• 4:1 hoist 100 kg
• 5:1 hoist 125 kg
BRIEF DESCRIPTION
Minimum weight of the load: depending
on the ratio, see diagrams from page 18
Application temperature: -30 °C to
+60 °C
All other uses are deemed improper. The
company BORNACK will not be liable for
any ensuing damages. The user bears
the sole risk.
FUNCTION
Loads can be positioned in a controlled
manner with the LH200. If the user lets
go of the pull rope, the auto-stop func-
tion blocks and prevents the load from
falling.
2 | 3
Advertisement
