Lh200 In Use - Bornack LH200 Translation Of The Original Instructions

ATTENTION:
Select an anchor point that allows the
load holder to be used without it being
in the fall space of the load holder and
load!
A Attach the load holder basic unit
directly to the anchor point using the
connector acc. to EN 362. If necessary,
create an anchor point on a strong
building element using appropriate
anchor equipment (e.g. STEP sling).
B Lower the end of the load rope with a
connector acc. to EN 362 or the pulley
with a connector down to the load
and attach.

LH200 IN USE

A
10 | 11
B