Bornack LH200 Translation Of The Original Instructions page 14

I A ratio of 2:1 is achieved as follows:
- 1. Place the support rope into the
lower pulley.
- 2. Attach the support rope with the
connector on the strap of the LH200
to mount the hoist.
J A ratio of 3:1 is achieved as follows:
- 1. Place the support rope into the
lower pulley.
- 2. Place the support rope into the
upper pulley.
- 3. Attach the support rope with the
connector to the load hook of the
lower pulley.
LH200 IN USE
I
1
J
2
1
14 | 15
2
3