Advertisement
For reasons of safety, intensive use and/
or extreme application conditions such
as sharp edges, chemical influences, UV
radiation etc. will reduce the usage
period. The company owner needs to
take this into account in the workplace
risk analysis.
The company owner must ensure
compliance with the maximum usage
period by documenting first-time use in
the test card.
The test card at the end of these instruc-
tions must be presented during the
regular expert inspections and be
completed by an expert.
For more details, please visit www.
bornack.de.
REPAIRS
• For reasons of liability, repairs may
only be carried out by BORNACK or in a
workshop authorised in writing by
BORNACK.
• Only original spare parts from the
manufacturer may be used.
OTHER
STORAGE
• Dry wet equipment before storage.
• Store in a dry place away from direct
sunlight.
• Do not store equipment near radiators.
Permanent exposure to temperatures
below 0 °C or above +50 °C has a nega-
tive impact on the strength of the
textile material and shortens the life
span.
• Do not allow equipment to come into
contact with aggressive substances
(e.g. oils, grease, acids, chemicals).
Precision mechanics oil may be applied
to moving metallic parts during main-
tenance. Always ensure that textile
components do not come into contact
with the oil.
• Do not store equipment close to
aggressive substances (see above)
because even the vapours of aggres-
sive substances can have a negative
effect on the strength of the equip-
ment.
• Protected storage in the DRYPACK.
TRANSPORT
• Protected transport in the DRYPACK.
EN
Advertisement
