Advertisement
MAINTENANCE
• If necessary, apply a small amount of
oil on the joints so that the moving
parts of connectors and other devices
run smoothly. If possible, use precision
mechanics oil. Ensure that the oil does
not come into contact with textile
components.
• Maintenance may only be carried out
by BORNACK or an expert briefed by
BORNACK about the inspection,
including the corresponding certifi-
cate. All instructions in these instruc-
tions must be strictly observed.
Equipment that is clean and well
looked after will last longer!
CLEANING
• Dry damp equipment in the air, not on
artificial heat sources. Dry metal
components with cloths.
• Clean soiled textile components (e.g.
ropes etc.) with lukewarm water and a
little detergent for delicates. Then
rinse carefully and allow to dry in the
air. Other cleaning agents are not
allowed!
• If disinfection is necessary, please
contact the e-mail hotline:
info@bornack.de
OTHER
• If the product comes into contact with
salt-water, keep it wet until it can be
rinsed with plenty of distilled water.
• Use compressed air to blow on the
unit if necessary.
LIFE SPAN
The following recommendation applies
for the use of the LH200:
Maximum usage period after being
used for the first time: 10 years
In ideal storage conditions and annual
inspections, the product may be stored
for up to 3 more years before it is used
for the first time without impacting on
the stated maximum usage period.
Every further year in storage reduces the
final maximum allowed usage period by
1 year.
Metal parts are not subject to age-re-
lated life span deadlines. The expert
makes a decision based on his technical
expertise and the latest version of the
standard.
22 | 23
Advertisement
