Advertisement
APPLICATION OPTIONS
The LH200 is designed for a manual
tensile force of up to 25 kg. As the load is
pulled with the LH200 manually using
physical force/body weight, the load
may not be too heavy. Otherwise, the
load cannot be lifted or lowered in a
controlled manner. Attach a hoist for
heavier loads (see page 13).
C One/two rope clamp(s) (ascender
right/left) can be used for a better grip
on the 9 mm rope and to facilitate use
of the LH200. To do this, open the
clamping cam and insert the rope.
Observe the User Manual of the
rope clamp.
ATTENTION:
Wear safety gloves when using the
LH200.
ATTENTION:
The rope must be free of knots and
kinks.
LH200 IN USE
C
EN
Advertisement
