Mocka Jolt Bedside Table Assembly Instructions Manual

Jolt Bedside Table
Assembly Instructions
Thank you for your purchase. Please follow the instructions for correct assembly.
While we took great effort to ensure these assembly instructions were correct at
the time of printing, sometimes updates are required post production. For the
most up to date versions please refer to the product page on our website.
mocka.com.au/mocka.co.nz
A B
dowel screw
x18 x8
H
G
slide slide
rail x2 rail x2
WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
E
C D
bolt locking screw
x18 nut x18 x20
I J K
slide slide
small nail
rail x2 rail x2
x8
Hardware Supplied
Phillips & Flathead screwdrivers
and hammer required
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
V
F
safety
strap x1
plastic
glides x4
W X Y
screw wall wall washer
x1
anchor screw
x1
x1
Wall Strap
Z
x2
1