Advertisement
Quick Links
Jolt Six Drawer - Wide
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
A
B
screw
dowel
bolt
x36
x31
x13
H
I
J
L + R slide
small bolt
rail x6
x30
WARNING:
Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
C
D
E
small
locking
screw x60
nut x13
K
L
M
small
plastic
locking nut
glide x6
long
x30
screw x4
Hardware Supplied
Phillips & Flathead screwdrivers
and hammer required
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
F
G
wall
strap x1
L + R slide
rail x6
N
O
nail
x28
long
dowel x6
V
W
X
Y
wall
wall
r/washer
screw
anchor
screw
x1
x1
x1
Wall Strap
Z
washer
x2
1
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Mocka Jolt Six Drawer - Wide
Summary of Contents for Mocka Jolt Six Drawer - Wide
- Page 1 Phillips & Flathead screwdrivers and hammer required For quicker assembly, we recommend the use of a power drill on a low-speed setting. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 2 [2] and [3]. on each of the panels [2] and [3] using 3x small screws (E) in each rail bracket. Fasten all screws with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 3 (A) into panel [6] and attach connecting parts with a locking [4] using 18x small screws (E). Fasten all screws with a screwdriver. nut (D). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 4 Assembly Instructions Connect panel [4] to panel [6] with a locking nut (D) Connect remaining 3x panels [5] with 6x long dowels (N) on panel [4]. and tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 5 Use 4x long screws (L) to secure panels [7] and [8]. Attach panel [2] with You’re done, enjoy! (D) and. tighten with a screwdriver. 3x locking nuts (D). Hammer 6x plastic glides (M) into base. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 6 Attach both back panels [9] to the cabinet using 28x nails (O) and Slot together with rest of the cabinet. Place 6x locking nuts (D) a hammer. into corresponding holes and tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 7 [15] into place using 6x screws (B) into the holes dowel (A), small bolt (J) and locking nut (K) into panel [10]/[11]. on the side and support panels mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 8 10 drawer fronts are on the left side and all panel 11 drawer fronts are on the right. Ensure all drawers slide easily open and closed. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 9 (V). Fasten to wall using 1x washer with a screwdriver. (Z), 1x wall anchor (X) and 1x wall screw (W). Ensure unit is balancedand steady before use. You’re done, enjoy! mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Need help?
Do you have a question about the Jolt Six Drawer - Wide and is the answer not in the manual?
Questions and answers