tams elektronik BiDiBooster Manual page 31

BiDiBooster
LED
The LED on the front lights or flashes indicating the operation modes or
problems that occur.
LED
yellow – constantly lighting
yellow – slowly flashing
(approx. 1 sec. cycle)
yellow – quickly flashing
yellow – 2x flashing | break |
2x flashing
red – slowly flashing
(approx. 1 sec. cycle)
red – quickly flashing
red – 2x flashing | break |
2x flashing
orange - flashing
orange – constantly lighting
Meaning
The Booster is in operation.
No signal from the control unit, BiDiB
not connected.
Programming has been started.
The booster has been switched off by
a points switching command.
The booster has been switched off
due to exceeding the maximum
temperature. After cooling it will be
switched on automatically (digital
signal from the control unit
provided).
The booster has been switched off
after a short circuit. After x seconds it
will be switched on automatically
(digital signal from the control unit
provided).
The watchdog has been released and
the booster has been switched off in
consequence.
No signal from the control unit, BiDiB
connected.
The booster has been switched off
via a BiDiB command, the digital
signal is still provided.
English
Page 31