tams elektronik BiDiBooster Manual page 26

English
Function
Autostarting time
after a short circuit
Default value:
4 sec.
Max. track current
(interrupting
current)
Default value: 3 A
RailCom. Default
value: active
Determining the
interface
Switching off with a
DCC points
switching command
Default value:
inactive
Page 26
Value for Settings / Remarks
CV#7
34 4 sec.
35 5 sec.
36 6 sec.
... 7 ... 9 sec.
40 10 sec.
42 2 A
43 3 A
44 4 A
51 active
52 inactive
53 BiDiB-booster port
54 DCC-booster port
55 Reception of the booster signals via
the DCC-booster port and
transmission via the RJ 45-booster
port
71 active
72 inactive
73 Change over into the progr. mode.
When within 30 sec. a DCC points switching
command is set, the BiDiBooster takes over the
corresponding points address to release the
switching off funtion.
Condition: Switching off function = "active".
BiDiBooster