Splitting Your Model Railway Layout - tams elektronik BiDiBooster Manual

BiDiBooster

5. Splitting your model railway layout

Split your model railway layout in several track sections electrically
isolating them from each other. Every section has to be supplied by a
booster of its' own. In each section a maximum of three to five
locomotives should run at the same time. The following divisions are
useful:

station

engine sheds

the main lines (if necessary in several sections)

the branch lines (if necessary in several sections)
Make sure that section borders are not crossed too often.
Isolate the borders between the booster sections as follows:

With 2-rail systems: one rail. Be sure to isolate in all booster sections
on the same rail ("left" or "right"). In large confusing layouts it is
recommended to isolate both rails.

With 3-rail systems: the middle conductor.
English
Page 15