Programming Via Bidib - tams elektronik BiDiBooster Manual

English
Time for inrush
current limiting
Determining the
port

7.1. Programming via BiDiB

As soon as the BiDiBooster is connected to a BiDiB controlled and
monitored layout, it is integrated automatically into the PC layout
control. By aid of the PC control software or (when not possible with
this software version) special tools (e.g. BiDiB-Monitor or BiDiB-Wizard)
the booster specific configuration variables (CVs) and the BiDiB feature
settings are programmed. It is also possible to make a software update
via BiDiB.
Page 24
Possible settings
2 - 500 ms
BiDiB-interface,
DCC-interface or
reception of the
booster signals via
the DCC-booster
port and
transmission via
the RJ 45-booster
port
Manu- Setting
facturers with
settings jumpers
100 ms no
DCC- yes
interface
BiDiBooster