Sunjoy L-BG011PST-1 Assembly Instructions

Parts List
Bridge Rail A 2 PCS
Bridge Surface B 2 PCS
Side Rail C 2 PCS
Middle Rail D 1 PC
Decorative Top E 4 PCS
Foot Plate F 4 PCS
For technical assistance or replacement parts call Sunjoy Monday through Friday from 8:30 AM to 5:30 PM ET at following:
US 1-866-578-0101 or e-mail: service@ferro-works.com.
NOTE: Please read instructions prior to assembly. It is recommended to use two people for assembly.
For outdoor use only. Keep instructions for future reference.
Ground stakes are included for use on dirt and grass. Ensure surface is level for secure staking.
For ease of cleaning and safety, do not assemble less than 6 ft / 1.8 m from any obstruction such as a fence, garage,
house, overhanging branches, laundry line or electrical wires.
When assembling and using this product, basic safety precautions should always be followed to reduce the risk of
personal injury and damage to equipment.
Install on level ground.
Check all bolts for tightness before and during usage.
WARNING: Assemble as per instructions only. Do not alter the construction of the bridge. Children and pets should be
supervised when they are in area of the bridge.
Notes before assembly: Permanent installation recommended. To ensure safe use of this bridge, it may be necessary
to install foot plates permanently into poured concrete blocks or railroad ties or similar using suitable bolts. Consult a
qualified contractor or representative at your local hardware store or home center.
Garden Bridge
Assembly Instructions
ITM./ART. 452795
Product #: L-BG011PST-1
M8X 20 mm Bolt
(TBZ00308020HS）
M8 Spring Washer
(TBZ10508HS)
M8 Flat Washer
(TBZ10808HS)
M8 Nuts
(TBZ20108HQ)
M6X 15 mm Bolt
(TBZ00306015HS)
M6 Flat Washer
(TBZ10806HS)
260 mm Ground
Stake(TBZ10608260HQ)
M8, M10 90 mm
Wrench
12
a
PCS
18
b
PCS
18
c
PCS
6
d
PCS
24
e
PCS
24
f
PCS
8
g
PCS
W 1 PC