HP Vectra VL410 Upgrade Manual page 34

Hp vectra vl410: supplementary guide

Hide thumbs Also See for Vectra VL410:

Table of Contents

Upgrading and replacing hardware

9 Insert the new power supply and reroute the black cables.

10 Replace the four screws to secure the power supply.

11 Align the external power connector and voltage switch and replace the two rear screws.

12 Replace the CD-ROM (or DVD) drive, fan and airflow guide.

13 Reconnect all internal power supply connectors.

14 Replace the cover. Refer to page 10.

15 Select the correct voltage setting for your country.

Table of Contents