Upgrading Or Replacing Main Memory - HP Vectra VL410 Upgrade Manual

Hp vectra vl410: supplementary guide

Hide thumbs Also See for Vectra VL410:

Table of Contents

Upgrading and replacing hardware

Upgrading or replacing main memory

Note

Use only HP memory modules provided for your PC model. The use of other memory modules is not supported. For information about

supported HP accessories, connect to

1 Switch off the PC and remove the computer's cover. Refer to page 8.

2 Open the two tabs and remove the old memory module (if required).

3 Align the notches on the bottom of the module with the corresponding marks on the socket and push

it firmly into place. The clips close automatically.

4 Replace the cover. Refer to page 10.

www.hp.com/go/pcaccessories

. You can install up to 512MB.

Position of memory

modules

Table of Contents