HP Vectra VL410 Upgrade Manual page 32

Upgrading and replacing hardware
6 Insert the new power supply (lining up the metal catches).
7 Replace the four screws to secure the power supply.
8 Reconnect all internal power supply connectors.
9 Replace the airflow guide.
10 Replace the cover. Refer to page 10.
11 Select the correct voltage setting for your country.
Small form factor models
1 Switch off the PC and remove the computer's cover. Refer to page 8.
2 Remove the airflow guide (if fitted).
3 Remove the fan by pressing the two latches inward then lifting it free.
32