Removing And Replacing The Cover And Front Panel - HP Vectra VEi7 User Manual
Corporate pcs
Hide thumbs
Also See for Vectra VEi7:
- Supplementary manual (80 pages) ,
- Technical reference manual (54 pages) ,
- Installation manual (32 pages)
Table of Contents
Advertisement
Removing the Cover
Removing and Replacing the Cover and Front Panel
Before removing the cover, switch off the monitor and PC, disconnect
all power cords and any telecommunication cables. If necessary, unlock
the cover at the rear of the PC.
1 Undo the three thumb screws at the back of the PC and remove the
cover by sliding it towards you by about 2 cm (0.8 inches) and then
lifting it off.
2 If required, remove the front panel. To remove the panel, lift the two
retaining catches, then tilt the panel forwards and lift it off.
3 Replacing Hardware Components
Removing and Replacing the Cover and Front Panel
English
23
Hide quick links:
Advertisement
Table of Contents
